home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.20000824-20010305
/
000219_news@columbia.edu _Thu Jan 25 11:13:46 2001.msg
< prev
next >
Wrap
Internet Message Format
|
2001-03-05
|
6KB
Return-Path: <news@columbia.edu>
Received: from watsun.cc.columbia.edu (watsun.cc.columbia.edu [128.59.39.2])
by uhaligani.cc.columbia.edu (8.9.3/8.9.3) with ESMTP id LAA05928
for <kermit.misc@cpunix.cc.columbia.edu>; Thu, 25 Jan 2001 11:13:45 -0500 (EST)
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.59.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id LAA22378
for <kermit.misc@watsun.cc.columbia.edu>; Thu, 25 Jan 2001 11:13:38 -0500 (EST)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.9.3/8.9.3) id LAA01210
for kermit.misc@watsun.cc.columbia.edu; Thu, 25 Jan 2001 11:09:43 -0500 (EST)
X-Authentication-Warning: newsmaster.cc.columbia.edu: news set sender to <news> using -f
From: "Tom Grant" <Tom.Grant@LaCodeWORKS.com>
Subject: MS/Kermit Telnet keepalive
Date: Thu, 25 Jan 2001 10:05:56 -0600
Organization: Posted via Supernews, http://www.supernews.com
Message-ID: <t70jqqo7o3mn90@corp.supernews.com>
To: kermit.misc@columbia.edu
We're running MS/Kermit 3.15 on several NT remote boot (dos 6.22)
workstations as a VT100 Telnet client. MSK's 3.15 what's new file
notes improved support for keepalive.
How is the keepalive implemented? Is there a net.cfg,
mskermit.ini or tcpip.ini setting I'm missing? (File contents below)
Our telnet server (RFGen http://www.rfgen.com) has timeout
disabled, but we're dropping sessions.
Any help is appreciated!
Thanks.
T
Protocol.ini
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[netbeui]
drivername = netbeui$
bindings = LP_NIF
names = 5
ncbs = 8
; packets = 20
pipeline = 10
sessions = 4
; stacksize = 512
lanabase = 0
; this is for LANpoint, none of these items should be changed
[LP_NIF]
DRIVERNAME = LPND$$$$
MAXTRANSMITS = 10
IOADDRESS = 0x300
INTERRUPT = 5
RAMSIZE(K) = 32
IOWORDSIZE = 8
;****************;
; Protocol ;
;****************;
[PKTDRV]
DRIVERNAME=PKTDRV$
BINDINGS=LP_NIF
INTVEC=0x60
; INTVEC=0x66
[IPX_XIF]
Drivername = IPX$
LOAD = IPXMARK[U],IPX[U]
UNLOAD = IPXREL[C]
BINDINGS = LP_NIF
================================
DOSBB.CNF
;c:\winnt\rpl\bblock\netbeui\timep\dosbb.cnf
; DOS on LANpoint Ethernet
BASE D0H
RPL BBLOCK\RPLBOOT.SYS
LDR BBLOCK\RPLSTART.COM ~
DAT BBLOCK\NETBEUI\lanpoint\PROTOCOL.INI
DRV BBLOCK\RPLDISK.SYS ~ ~ ~
EXE BBLOCK\RPLPRO1.COM ~ 2 ~
EXE BBLOCK\I13.COM ~ ~ ~
EXE BBLOCK\RPLBIND2.EXE ~ ~
EXE BBLOCK\PROTMAN.EXE ~ ~
EXE BBLOCK\RPLBIND1.EXE ~ ~
DRV BBLOCK\IPXNDIS.DOS ~ ~ ~
;
;DRV BBLOCK\TCPDRV.DOS /I:C:\LANMAN.DOS ~ ~
DRV BBLOCK\NDIS\dis_pkt9.dos ~ ~ ~
EXE BBLOCK\NETBEUI\NETBEUI.EXE ~ 10 ~
DRV BBLOCK\NDIS\LP_NDIS.SYS ~ ~ ~
DRV BBLOCK\PROTMAN.DOS /I:C:\LANMAN.DOS ~ M
;EXE BBLOCK\ODI\IPXODI.COM ~ ~ ~
;EXE BBLOCK\ODI\LPNICE.COM ~ ~ ~
;EXE BBLOCK\ODI\LSL.COM ~ ~ ~
================================
Net.cfg:
LINK DRIVER LPNICE
FRAME ETHERNET_802.2
================================
TCPIP.ini:
SET TCP/IP HOST 192.168.3.1
SET TCP/IP ADDRESS 192.168.3.10
SET TCP/IP SUBNETMASK 255.255.255.0
SET TCP/IP GATEWAY 0.0.0.0
SET TCP/IP BROADCAST 255.255.255.255
SET PORT TCP
================================
MSKERMIT.ini
;MSKERMIT.INI
if not < \v(version) 315 forward PATCH
echo This MSKERMIT.INI file must be used with MS-DOS Kermit 3.14 or later
stop 1
:PATCH
Echo Executing \v(cmdfile)...
if inpath MSR315.PCH forward PATCH2
if not inpath MSKERMIT.PCH forward BEGIN
:PATCH2
echo Installing Patches
echo
patch
:BEGIN
;
; Set up file transfer information
set file collision overwrite ; Do overwrite existing files
set transfer character-set transparent ; No surprise translations
set receive packet-length 94 ; Regular-size packets
set attributes on ; Use file-attribute packets
set window 1 ; Don't use sliding windows
;
; Set up normal terminal
set terminal display 8 ; In the 8-bit environment
set terminal vt320 ; Emulate DEC VT220
set terminal roll off ; Keep rolled-back where they are
set terminal wrap on ; Tell Kermit to do line wrap
set terminal tabs at 1:8 ; Set tabs at every 8 spaces
set terminal cursor underline ; Underline cursor (rather than
block)
set terminal type ANSI ; Change this if desired.
set terminal bytesize 8 ; Change to 8 if desired.
set terminal color 20 ; Set Color so ESC[0m resets
set terminal answer on ; Set Answerback to respond to ^E
set terminal answer message :HHT ; Set Answerback Message to add
$TERM
set mode-line off
set warning off
set prompt [\v(dir)] MS-Kermit>
COMMENT - TCP/IP network configuration.
;
check tcp
if fail forward notcp
; Read in TCP/IP Connection Info
;
take tcpip.ini
forward KEYS
:notcp
; Read in SERIAL Connection Info
;
;take serial1.ini
:KEYS
; [KEYS omitted for brevity]
connect
cls
quit
================================
autoexec.bat:
@ECHO OFF
REM **************************************************************
REM ** Microsoft LAN Manager **
REM ** Copyright(c) Microsoft Corp., 1990 **
REM **************************************************************
SET COMSPEC=C:\DOS\COMMAND.COM
SET PATH=C:\LANMAN.DOS\NETPROG;C:\DOS;C:\BINR;C:\BINB;
SET PROMPT=$P$G
SET TMP=C:\TMP
SET TEMP=C:\TMP
SET DOSSHELL=C:\WKSTA
VER
ECHO ON
NET START RDR /RPL:YES /FIT:YES /COMPUTERNAME:(COMPUTER_NAME) /HIMEM:YES
FIXMEM
Rem following line configures built in RFID decoder for [CR][LF]
echo SEP1>COM2
cd c:\wksta\kermit
msk315
REBOOT